See the equipment first-hand at the Scott4U Booth #1667 and schedule an onsite appointment and demo.
Products that will be Featured at the Scott4U Booth include the Watson-Marlow’s CERTA pump, Caframo Stirrers (BDC3030, BDC1850 & BDC2010), Silverson L5MA Mixer, Readco Powder Blender, Bematek’s Colloid Mill, and more.
(more…)Interphex 2019 | Visit Booth 2833 | April 2-4, 2019 | Javits Center, NYC
Scott Process Engineers and WMFTG experts will be on hand to demonstrate the industry leading Quantum peristaltic pump with patented ReNu single-use (SU) cartridge technology.
See first-hand Flexicon’s FPC60; Flexible, Configurable Fill/Finish System.
Azadeh Farahanchi, Rheological Scientist, Ph.D
How Rheological Data from a Capillary Rheometer Can Help to Have a Better Metal Injection Molding (MIM) Process?
Metal injection molding (MIM) is an advanced metalworking process to produce parts with complex shapes and high tolerances from a mixture of polymeric binder and metal particles/powders at specific volume ratios (feedstock). The flexibility and mass production of injection molding process makes it to be a great replacement to the traditional metallurgy process and therefore, MIM has been growingly performed in industry for large-number production of metal parts.
One of the key factors in any MIM process is the flow behavior of the feedstock during filling of of the mold. In order to have a defect free molding process (without jetting, short shot, sink mark, crack, etc.) with desired mechanical strength (tensile, flexural, failure stress, etc.) in the final products, understanding of the rheological properties of the binder and feedstock is necessary. The rheological analysis also helps to have defect free debinding and sintering procedures which are the final steps in a MIM process and gives the required mechanical strength to the final products.
In terms of rheological properties, there are three main factors which have significant effect on a MIM process namely, viscosity at the processing shear rate, thermal sensitivity, and shear thinning behavior of the feedstock. All these factors can be analyzed using a capillary rheometer. Since this rheological characterization method provide a wide range of shear rate, it is the best approach to study feedstock melt behavior in an injection molding process.
Interphex 2019 | Visit Booth 2833 | April 2-4, 2019 | Javits Center, NYC
Quantum redefines peristaltic pump performance for single-use downstream bioprocessing.
Scott Process Engineers and WMFTG experts will be on hand to demonstrate the industry leading Quantum peristaltic pump with patented ReNu single-use (SU) cartridge technology.
Easy Streamlined Batch Production with Flexicon’s New FPC60
Uniquely flexible, configurable fill/finish system.
Interphex 2019 | Visit Booth 2833 | April 2-4, 2019 | Javits Center, NYC
Biotechnology and pharmaceutical fluid-in-motion expert Watson-Marlow Fluid Technology Group (WMFTG), will be showcasing its unparalleled bioprocessing products including the New Flexicon FPC60, highly accurate peristaltic fill/finish system offers customers exceptional production flexibility. A wide variety of modules are available for the system, allowing users to create their own unique filling solution to suit small-batch applications. The modules include vial infeed, filling, stoppering, capping, auto-reject, gas purging and product outfeed. As a result, the FPC60 is ideal for bioprocessing applications.
Interphex 2019 | Visit Booth 2833 | April 2-4, 2019 | Javits Center, NYC
Scott Process Engineers and WMFTG experts will be on hand in Booth #2833 to demonstrate the industry leading Quantum peristaltic pump with patented ReNu single-use (SU) cartridge technology.
Stop by the SCOTT PROCESS Booth #524
Meadowlands Expo Center | 355 Plaza Drive, Secaucus, NJ 07094
The most common purpose of agitation in biopharmaceutical processing is liquid/liquid and solid/liquid blend (solutions and suspensions). Agitators are performing their duty while submerged in a fluid phase, and consequently designed for this intended use, considering that running in air would not fit any purpose. This article discusses different bearing designs and materials of construction typically available.
Bematek’s Colloid Mill Will be featured in the Scott Process Equipment Corp Booth #1581 at the 2018 New York Society of Cosmetic Chemists (NYSCC) Suppliers’ Day on May 15th and 16th at the Javits Convention Center in New York City.
Valued as an industry innovator, Bematek brings more than 70 years experience to high-shear colloid mill design. We are inspiring process industry innovation and delivering solutions to meet the increasingly complex manufacturing demands of the cosmetic chemist.
The wet milling of formulations is one of the oldest processing activities that still exists today in modern manufacturing environments. The reduction of particles in dispersions and droplets in emulsions is done by applying hydraulic and mechanical shear to various process ingredients. Bematek colloid mills are recognized as the equipment of choice for increasing the stability of dispersions and emulsions in today’s complex homogenizing processes.
The Bematek Colloid Mill is a conical rotor/stator mill for processing colloidal dispersions, emulsions and suspensions, and works on the principals of shear rate residence time.
These parameters make scale-up from R&D to full production simple and reliable.
Montrose, NY, April 14, 2018 — Scott Process Equipment Corporation (www.Scott4U.com) is proud to announce that the MasoSine Certa pump will be featured at the 2018 NYSCC Suppliers’ Day on May 15th and 16th at the Javits Convention Center, NYC, Booth 1581.
Certa is cleaner than any lobe or circumferential piston pump (more…)