973-729-7971

Scott Process

Equipment Corp

News

Archive for the ‘Bematek’ Category

NYIFT 2021 Suppliers Day

Posted on: September 7th, 2021

 

NYIFT 2021 Supplers Day

New York Institute of Food Technologists

Scott Process Equipment Proud Corporate Sponsor and Suppliers Day Exhibitor

________________ 

Tuesday, September 14, 2021

NYIFT Suppliers Day & Career Fair  —  The Largest IFT Expo on the East Coast

Scott4U Booth # 324

Meadowlands Expo Center, 355 Plaza Drive, Secaucus, NJ 07094

Free for Attendees and Open to Members and Nonmembers

 

This Expo and Career Fair is open to all segments of the food and related industries. You will meet with companies and representatives from the beverages, dairy, seafood, baking, confectionery, pet, vitamins, nutraceuticals, fruit & vegetables, meats & poultry, retail foods, food service, packaging, processing, laboratory equipment, sanitation, analytical testing, computer technology/software, and many more!

Looking forward to seeing you at the show … Booth # 324

SCHEDULE

  • 1:00 – 3:30 PM – Technical Seminar – Microencapsulation: Technology & Applications – Register Here   Pre-Registration Payment is required to guarantee your seat
  • 3:30 – 6:30 PM – Expo & Career Fair
  • 6:30 – 8:00 PM – After-Show Reception – Open to Attendees and Exhibitors. Beat the traffic and stay for a casual bite to eat with a cash bar. There is no fee to attend this social event.

COVID-19 Impact on Manufacturing

Posted on: March 20th, 2020

 

“manufacturers are grappling with disruptions to
their businesses due to the COVID-19 outbreak”

NAM Pres. and CEO J Timmons

Committed to being part of the solution every step of the way to protect the health and well-being
of our communities and country, manufacturers play a Critical Role in the COVID 19 Response.

Scott Process recognizes during these difficult times,
our customers need us more than ever.

As you confront fluctuations in supply and demand and changes in production
and operations, rest assure, Scott4U is available via email, phone, or video conference.
We can efficiently procure critical spare parts now and help avoid extended lead times in Q2-Q4.

“Caution is appropriate. Preparedness is appropriate. Panic is not.”

(U.S. Surgeon General Dr. Jerome Adams, commenting on the corona-virus outbreak)

Scott4U – Your Engineering and Process Equipment Resource

*********************************************

Together, we are facing a truly unprecedented situation. The global corona-virus pandemic is affecting all of our families, our businesses, our communities, and our way of life. First and foremost, our hearts go out to anyone who’s been impacted by the virus, either directly or indirectly and grateful to those who work tirelessly to care for people in need.

CAUTION

Scott Process is taking all necessary precautions; Scott4U team members work remotely, and are adhering to CDC guidelines, while assisting our customers overcome the myriad of challenges caused by COVID-19.

CHALLENGES – COVID-19’s impact on your company

Businesses are confronting significant and unique challenges including:

  • Caring for employees; a company’s most valuable resource
  • Supply chain disruption
  • Fluctuation in demand
  • Ramping up manufacturing capacity as needed
  • Shifting production
  • Longer lead times
  • Rapidly changing regulations and restrictions
  • Maintaining food safety and product integrity

PREPARE – short-term measures and long-term plans

Preparedness is key and Scott4U is here to help you.

  • Scott4U is open for business – let us help keep your labs, plants and production facilities up and running
  • Meeting our commitments to deliver quality, reliable products that are essential to your success
  • Sourcing Alternative Solutions — the Scott4U sales team is focused on finding the right process equipment or an integrated system for each unique application.
  • Engineers first, with decades of experience ensures our knowledge of equipment and the processing industry and the ability to suggest alternative solutions when needed
  • Procuring critical spare parts
  • Fast turn-around on Quotes and Order Processing
  • Quick delivery on critical lab or process equipment
  • Competitive pricing
  • Support commissioning, installation, and field service in areas where travel is still permitted and to the extent that our employees, customers and partners remain safe.
  • Staying connected – utilizing technology to allow for additional virtual capabilities to keep our team members safe and connected to customers.
  • Forecasting future needs of spare parts to avoid extended lead time in Q3 and Q4

If you need immediate help securing parts or equipment for your facility, please contact a Scott4U engineer via email: Sales@Scott4U.com or phone: (973) 729-7971 x 101.

In this rapidly changing environment Scott4U is here to help our neighbors and customers.

***
About Scott Process

Since 1989, Scott Process Equipment has focused on helping customers in the Bio-Pharm, Pharmaceutical, Chemical, Food & Beverage, Industrial, Personal Care Products, Cosmetics, Plastics and Polymers industry solve design problems. Scott Process Equipment Corp offers a robust product line, proudly representing pump, mixer, homogenizer, powder blender, sensor, controller, scale, valve, filling system, polymer test equipment, strainer, and heat transfer equipment manufacturers.

Engineers first, the sales team is focused on finding the right process equipment or an integrated system for each unique application. Decades of experience ensures their knowledge of equipment and the processing industry.

Honest, straight-forward and service-oriented professionals committed to their customers, Scott Process is Your Engineering and Process Equipment Resource.

About NAM

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.8 million men and women, contributes $2.37 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 63% of private-sector research and development.

NYIFT 2020 Suppliers’ Day Booth 223

Posted on: March 9th, 2020

 

NYIFT

Suppliers’ Day

WHEN

Wednesday, March 25, 2020

NOW Tuesday, September 22nd

NYIFT announced on March 11th that as a result of corporate travel restrictions, and their commitment to the health and safety of everyone involved due to the concern of the Coronavirus (COVID-19), they have made the decision to POSTPONE its NYIFT Suppliers Day Expo, Technical Seminar and Career Fair originally planned for Wednesday, March 25, 2020, to Tuesday, September 22, 2020.

Please stay safe and healthy and mark your calendars for September.

SCHEDULE
Technical Seminar – 9:30 a.m. – 3:30 p.m.
“CBD & Hemp in Edibles: 2020 & Beyond”
View Program Below

Expo & Career Fair – 3:30 – 6:30 p.m.

Scott4U Booth 223

After Show Reception – 6:30 – 8:00 p.m.

WHERE
Meadowlands Expo Center
355 Plaza Drive, Secaucus, NJ 07094

ATTENDEE REGISTRATION

The NYIFT Suppliers Day and Career Fair
The Largest IFT Expo on the East Coast

Scott Process and the  New York Institute of Food Technologists (NYIFT) invites you to participate in our largest event of the year being held on Tuesday, September 22, 2020 at the Meadowlands Expo Center in Secaucus, NJ. Returning to last year’s location.  This Expo and Career Fair is open to all segments of the food and related industries.  You will meet with companies and representatives from the beverages, dairy, seafood, baking, confectionery, pet, vitamins, nutraceuticals, fruit & vegetables, meats & poultry, retail foods, food service, packaging, processing, laboratory equipment, sanitation, analytical testing, computer technology/software, and many more! There will be over 250 exhibitors!

Technical Seminar Program

  • Policy & Regulatory Update of CBD & Hemp
  • CBD + Food: Quality & Food Safety Challenges
  • How to Bring an Infused Product to Market: challenges, risks, and opportunities
  • CBD as a Novel Food Ingredient
  • Consumer Insights, Health & Wellness for CBD & Hemp
  • CBD & Hemp: State of the Industry
  • Hemp Ingredients-Delivering Nutrition and Functionality in Food
  • Sensory Considerations when Formulating with CBD
  • Level Up Your Edibles
  • Product Tasting Opportunity & Break
  • Learnings from a Journey into Canna-Beverages

Colloid Mill Shear Fundamentals

Posted on: March 9th, 2020

Shear Rate  |  Shear Stress

Colloid Mill Shear Fundamentals by Bematek

INTRODUCTION

Based on the known operating parameters of a Bematek colloid mill, it is possible to estimate the shear rate and shear stress experienced by each internal phase particle of an emulsion or dispersion while it is within the gap between the rotor and stator.

Before presenting the calculations, it must be emphasized that any such attempt to develop a mathematical model of a real world situation can only be viewed as an approximation. The real world seldom, if ever, conforms in every detail to our neat and orderly expectations. Our analysis is limited both by a less than perfect understanding of the physics involved and by the necessity to make certain assumptions in the mathematical treatment. Nevertheless, the colloid mill shear calculations performed for many years by the Bematek engineering team have proven to be very useful and reliable for designing colloid mills that perform up to the specified production requirements.

Bearing in mind the cautions noted above, the shear rate and shear stress generated within the rotor/stator gap of a Bematek colloid mill can be calculated as a function of the following basic operating parameters:

  • D (ft) = rotor exit diameter
  • N (rpm) = rotor rotational velocity
  • h (ft) = rotor/stator gap
  • μ (cP) = product viscosity

All of the other necessary variables can be derived from these fundamental quantities.

 

ROTOR TIP SPEED

The first step is to calculate the tangential linear velocity of a point on the working surface of the rotor.  This is called the peripheral rotor tip speed (see Figure 32-003-1).

It is clear from Figure 32-003-1 that the diameter at the rotor surface increases from “d” to “D” as one travels through the rotor/stator gap. However, to arrive at a preliminary result for this basic analysis, we will consider the diameter of the rotor to be its exit diameter. A more complete analysis is presented in another Tek Talk issue.

Roto from the inlet

Figure 32-003-1: Rotor As Seen From Inlet

Considering a random point (P) on the outer edge of the rotor, as shown in Figure 32-003-1, one complete revolution of the rotor travels a distance equal to the exit circumference of the rotor.

S= πD

Next, we apply an equation that relates linear velocity to angular velocity for circular motion:

v=S x N

By combining the two previous equations, we arrive at the desired result:

v =πDN/60   (32-003-1)

Where, v (ft/sec) = linear velocity at rotor surface

D (ft) = rotor exit diameter

N (rpm) = rotor rotational velocity.

Note:  A conversion factor of 60 has been applied in the above equation to permit the expression of “N” in the more common units of rpm.

SHEAR VELOCITY

Having expressed the velocity of any point on the rotor surface in terms of known variables, we can now move on to an analysis of the phenomena within the rotor/stator gap. In order to accomplish this, we will approximate the rotor and stator surfaces in the immediate vicinity of any random point in the shear area by straight lines. Since the rotor/stator gap is typically three orders of magnitude smaller than the rotor diameter, this is justifiable. Then, a coordinate system is chosen so that the x-axis lies along the stator surface, and a random point (P) within the rotor/stator gap has coordinates (x, y) with a shear velocity of u. The situation is illustrated in Figure 32-003-2.

Figure 32-003-2: Rotor/Stator Gap (Seen From Inlet)

Figure 32-003-2: Rotor/Stator Gap (Seen From Inlet)

It is clear from the symmetry of the situation that the velocity at the random point cannot be a function of its x coordinate, because any other point along a horizontal line through this point is subjected to exactly the same shear forces. Now, as an initial attempt, assume that the velocity at P can be expressed as a simple linear function of its y coordinate:

u = Ay + B     (32-003-2)

Where, u (ft/sec) = velocity at point P

y (ft) = y coordinate at point P

A, B = unknown constants.

In the equation above, the unknown constants must be determined from the boundary conditions of the problem. A known empirical fact from the field of fluid mechanics, which states that a fluid in contact with a solid object assumes the velocity of that object, leads to the following conclusions:

  • the velocity of any point on the rotor surface is v
  • the velocity of any point on the stator surface is 0

Thus, the following two equations can be used to express the boundary conditions:

uy=0  = A × 0 + B = 0

uy=h  =  A × h + B = v

The solution of this pair of simultaneous equations requires that B = 0 and A = v/h. By combining Equation

32-003-1 and Equation 32-003-2 and inserting these values, a final expression for the velocity at our random point is obtained:

    u =πDN/60 ∙ y/h              (32-003-3)

Where, u (ft/sec) = velocity at point P

D (ft) = rotor exit diameter

N (rpm) = rotor rotational velocity

y (ft) = y coordinate at point P

h (ft) = rotor/stator gap.

Notice that at y = 0 and y = h, the values calculated for “u” do indeed satisfy the boundary conditions. The fact that values for the constants A and B were found which led to a final equation meeting the boundary requirements indicates that the assumption of linearity was valid.

SHEAR RATE AND SHEAR STRESS

With the shear velocity equation completed, we are now prepared to complete the shear calculations. In the rectangular coordinate system, a velocity function that is independent of the x and z coordinates leads to the following expression for the shear rate at our random point:

R =du/dy= πDN/60h      (32-003-4)

Where, R (sec-1) = shear rate at point P

u (ft/sec) = velocity at point P

y (ft) = y coordinate at point P

D (ft) = rotor exit diameter

N (rpm) = rotor rotational velocity

h (ft) = rotor/stator gap.

Having calculated the shear rate, one final definition from the field of fluid mechanics completes the analysis:

Viscosity (μ) =(Sheer Stress (τ))/(Shear Rate (R))

Implicit in this definition is an assumption that viscosity is a constant that is independent of the shear rate. In other words the fluid viscosity is assumed to be Newtonian. Then, by substituting the shear rate from Equation 32-003-4 above into this definition, the shear stress is given by:

τ =μπDN/60h

Finally, by combining all constants and converting viscosity to cP, the above equation becomes:

τ = (1.09 × 10–6 ) × μDN/h     (32-003-5)

Where, τ (lb/ft2) = shear stress

μ (cP) = product absolute (dynamic) viscosity

D (ft) = rotor exit diameter

N (rpm) = rotor rotational velocity

h (ft) = rotor/stator gap.

Equation 32-003-4 and Equation 32-003-5 above complete our task of expressing the shear rate and shear stress applied to any internal phase particle of an emulsion or dispersion passing through the rotor/stator gap, in terms of the basic operating parameters of the colloid mill.

A TYPICAL EXAMPLE

Now that all of the necessary equations have been developed, we can gain a feeling for the order of magnitude of some of these variables by applying the equations to a typical real world example. Let us assume that a hypothetical application has the following specifications:

  • N = 4800 rpm
  • D = 4 i = 0.33 ft
  • μ = 1 cP
  • h = 0.010 in. = 0.00083 ft

Then, we can use the equations derived in the previous section to calculate the shear parameters as follows:

v =(π x 0.33 x 4800)/60 = 83.8 ft/sec

R =(π x 0.33 x 4800)/(60 x 0.00083) = 100,531 sec-1

τ =”(1.09 x 10-6)” x (1 x 0.33 x 4800)/( 0.00083) = 2.09 lb/ft2

From the above example, the ease with which these three important processing parameters can be calculated from the known basic specifications of the Bematek colloid mill should be obvious.

 

SUMMARY

Although several assumptions and approximations were applied during the analysis presented here, the three important relationships derived have proven to be remarkably dependable. As a basic starting point, these equations may be used with complete confidence to accurately analyze a wide range of processing applications.

Nevertheless, Bematek’s efforts to further refine the hydraulic shear analysis are ongoing. Additional improvements in the mathematical model may be achieved by eliminating some of the assumptions and approximations made here. Specifically, factors such as the non-Newtonian nature of most fluid viscosities and the conical rotor face in Bematek’s colloid mills are considered.

NYSCC Suppliers’ Day 2019

Posted on: May 18th, 2019

For all your Mixing, Pumping and Filling Needs!

We enjoyed meeting and speaking with so many customers at the Scott Process Equipment Booth at the 2019 NYSCC Suppliers’ Day.

Committed to our customers, the Scott4U sales team is focused on finding the right process equipment or an integrated system for each unique application.

Engineering and Process Equipment Resource

Lab to Production

  Representing Premier Manufacturers

(more…)

NYSCC 2019 Suppliers’ Day

Posted on: May 1st, 2019

5/7-5/8 — Scott4U Booth 1667

NYSCC 2019 Suppliers’ Day Booth 1667

See the equipment first-hand at the Scott4U Booth #1667 and schedule an onsite appointment and demo

Products that will be Featured at the Scott4U Booth include the Watson-Marlow’s CERTA pumpCaframo Stirrers (BDC3030, BDC1850 & BDC2010)Silverson L5MA MixerReadco Powder BlenderBematek’s Colloid Mill, and more.

(more…)

NYIFT 2019 – Visit Scott4U at Booth 524

Posted on: March 5th, 2019

New York Institute of Food Technologists

2019 Suppliers Day & Mini Career Fair

Wednesday March 20, 2019     3:30 – 6:00 p.m.

Stop by the SCOTT PROCESS Booth #524

Meadowlands Expo Center  |  355 Plaza Drive, Secaucus, NJ 07094

(more…)

Bematek Colloid Mill featured at NYSCC

Posted on: May 10th, 2018
The Bematek Colloid Mill Leads Technology Innovation in Homogenizing, Emulsifying, and Dispersing for Cosmetic Formulations
View Bematek’s Colloid Mill Live!

Bematek’s Colloid Mill Will be featured in the Scott Process Equipment Corp Booth #1581 at the 2018 New York Society of Cosmetic Chemists (NYSCC) Suppliers’ Day on May 15th and 16th at the Javits Convention Center in New York City.

Valued as an industry innovator, Bematek brings more than 70 years experience to high-shear colloid mill design. We are inspiring process industry innovation and delivering solutions to meet the increasingly complex manufacturing demands of the cosmetic chemist.

The wet milling of formulations is one of the oldest processing activities that still exists today in modern manufacturing environments. The reduction of particles in dispersions and droplets in emulsions is done by applying hydraulic and mechanical shear to various process ingredients. Bematek colloid mills are recognized as the equipment of choice for increasing the stability of dispersions and emulsions in today’s complex homogenizing processes.

The Bematek Colloid Mill is a conical rotor/stator mill for processing colloidal dispersions, emulsions and suspensions, and works on the principals of shear rate residence time.

  • Rotor Speed
  • Rotor/Stator Gap
  • Rotor/Stator Surface Profiles
  • Flow Rate

These parameters make scale-up from R&D to full production simple and reliable.

(more…)

NYIFT Suppliers’ Day 2018

Posted on: May 1st, 2018

New York Institute of Food Technologists

2018 Suppliers Day & Mini Career Fair

Tuesday, May 8, 2018     3:00 – 6:00 p.m.

Stop by the SCOTT PROCESS Booth #524

(more…)

NYSCC Suppliers’ Day 2018

Posted on: May 1st, 2018

Scott Process Equipment announces they will be exhibiting at the 2018 New York Society of Cosmetic Chemists (NYSCC) Suppliers’ Day on May 15th and 16th 2018 at the Javits Convention Center, NYC

Save the Date  — May 15th and 16th 2018

Stop by Booth # 1581

 

Since 1989, Scott Process Equipment has been the Engineering and Process Equipment Resource for the personal-care and cosmetics industry. Engineers first, with decades of experience, the sales team are honest, straight-forward and service-oriented professionals, representing premier pumps, mixers, homogenizers, powder blenders, sensors, controllers, scales, valves, filling systems, strainers, and heat transfer equipment manufacturers. Scott4U is focused on finding the right process equipment or an integrated system for your unique application. Robust Line Card includes Bematek, Doyle & Roth, Dynisco. Hardy Process Solutions, Northern Pumps, Pick Heater, Readco, Roper Pumps, Sharpe Mixers, Silverson Machines, SPXFlow, Steridose, Sulzer Chemtech, Unibloc Pump, Watson-Marlow Fluid Technology Group, (Watson-Marlow Pumps, Watson-Marlow Tubing, Flexicon Liquid Filling, Bredel Hose Pumps, Masosin Process Pumps, Bio-Pure, ASEPCO, Flow Smart, and AFLEX Hose) and Zenith Pumps. Scott Process Equipment serves northern New Jersey, the lower counties of New York and Connecticut, NYC and Long Island. Choose Scott4U for all your Personal Care & Cosmetics Industry Engineering and Process Equipment Needs.

For more information about the NYSCC view the Scott Process Profile at https://nysuppliers18.mapyourshow.com/7_0/exhibitor/exhibitor-details.cfm?ExhID=2196

arrow_upward