973-729-7971

Scott Process

Equipment Corp

News

Archive for the ‘Featured Products’ Category

Advances in Low-Maintenance Chemical Dosing

Posted on: May 10th, 2022

On Demand Webinar and White Paper

Advances in Low-Maintence Chemical Dosing

Increasing regulatory compliance in water and wastewater management, coupled with staffing challenges, requires investment in technology to help meet current and future requirements for environmental compliance and staff safety, as well as for mitigating reputational and financial risk. Dosing pump failure can have a significant negative impact on compliance, staffing, and operations.

Watson-Marlow Fluid Technology Solutions (WMFTS) developed the Qdos peristaltic pump to address these challenges. With their latest Qdos® CWT™ model, pumphead life is extended by up to four times as long as traditional pumps. Easily changeable pumpheads reduce labor and maintenance costs, and safety features built into the pump lower compliance violation risk.

KEY TAKEAWAYS

  • Water and wastewater treatment challenges require continuous improvements in the technology used
    in the treatment process.
  • Built in response to customer needs, Qdos revolutionized chemical metering.
  • Watson-Marlow developed the Qdos CWT, a next-level peristaltic chemical metering pump.

Read the Webinar Summary / White Paper Now

Advances in Low-Maintence Chemical Dosing

Advances in Low-Maintenance Chemical Dosing White Paper and Webinar Summary

On Demand Webinar — Register Now 

*As seen on WaterWorld.com

Silverson FMX5 – Laboratory Powder / Liquid Mixer

Posted on: October 26th, 2021

FMX5 Laboratory Powder/Liquid Mixer

For mixing on a laboratory scale Silverson can now provide customers with the same powder/liquid mixing advantages as larger scale production with the introduction of the FMX5 to the product range. The FMX5 is a laboratory scale version of Silverson’s production scale Flashmix mixers and provides a simple, effective and hygienic means of powder/liquid mixing on a Laboratory scale. It is also able to process higher viscosity mixes. The FMX5 is suitable for small scale manufacturing and R&D work with a typical batch size of up to 10 litres, depending on viscosity. The mixer offers an accurate means of predicting the performance of the production scale Flashmix, making the scale-up process a simple task. The FMX5 offers proven performance on a wide range of powders including gums (CMC, Guar, Gum Arabic, Pectin, Xanthan), sugars, flours, milk powder, Carbopol, Bentonite and many others across a range of industries.

More Information and Video 

Rapidly Dissovle Sugar with No Heating Required

Posted on: December 8th, 2020

Do you want to know how to rapidly dissolve sugar at ambient temperature.  Use the link below to view the two videos illustrating how Silverson High Shear Mixers can accelerate the solubilzation process. 

Learn More and Watch the Views Now

Continuous Processors Allow Safe Operation While Empty

Posted on: May 7th, 2020

Readco’s Continuous Processors feature a design that allow safe operation while running on empty.

(Powder & Bulk Solids  — 4/30/2020)

These continuous processors feature a proprietary power transmission design and bearing configuration that allow safe operation while running on empty.

An upgrade versus extruders that must rely on the material to guard against metal to metal contact with the barrel, the continuous processors automatically prevent the mixing elements from contacting the barrel and eliminate risk of contamination from metal to metal contact to allow safe startup without any material in the process. By loading the recipe, raising the barrel temperature, and verifying the system settings while running empty, the continuous processor saves on both material and energy at every startup.

When shutting down for cleaning or maintenance, the continuous processors may be run on empty to allow the designed-in, self-wiping action of the mixing elements to automatically purge approximately 95% of the material from inside the mixing chamber. This advantage minimizes the need for chemical cleaning agents, offering cost savings and environmental protections in systems requiring solvents for cleaning.

Ideal for food, chemical, plastics, pharmaceutical, and other processors concerned about speeding production and reducing costs, the continuous processors are custom engineered for each installation to discharge a uniform, homogeneous end product that meets a variety of targeted specifications. The systems are designed based on product testing conducted on full-size equipment with customer formulations in the company’s on-site testing laboratory.

MAG MIXERS FOR FOOD AND BEVERAGE PROCESSING

Posted on: July 12th, 2019

As seen in Processing Magazine By Frank Sequino June 10, 2019

Taking a cue from the pharmaceutical industry, food and beverage processors can use these proven components to achieve better process isolation and containment.

Recalls and cross-contamination issues continue to plague food and beverage producers. Quite often, the problem can be traced back to a process step that is done in an open vessel. The pharmaceutical industry has addressed this by using closed vessels with magnetically driven agitators known as mag mixers, but the continued growth of the use of mag mixers is not limited to applications in the pharmaceutical market. There are also significant advantages in the food and beverage markets.

Mag mixers Steridose PR0619

Mag mixers have been a staple in pharmaceutical processes since their inception, but there has always been an imaginary dividing line between the sanitary requirements in the pharmaceutical industry and those of other sanitary industries. For example, “clean” in the food and beverage industry isn’t the same as “clean” in the pharmaceutical industry. That line is becoming blurrier every day. Today, terms like ultraclean, ultrasanitary and hygienic are commonly used, but their interpretation seems to vary from one person to the next. Regardless of one’s interpretation, it is easy to see that the food and beverage industry is heading in the direction of the pharmaceutical industry in terms of sanitary practices. As product recalls grow more prevalent, the need for the industry to have isolation and containment during processing has never been more prominent.

Figure 1. Anatomy of a mag mixer

(more…)

NYSCC Suppliers’ Day 2019

Posted on: May 18th, 2019

For all your Mixing, Pumping and Filling Needs!

We enjoyed meeting and speaking with so many customers at the Scott Process Equipment Booth at the 2019 NYSCC Suppliers’ Day.

Committed to our customers, the Scott4U sales team is focused on finding the right process equipment or an integrated system for each unique application.

Engineering and Process Equipment Resource

Lab to Production

  Representing Premier Manufacturers

(more…)

INTERPHEX stop by to see Scott Process at Watson-Marlow Booth 2833

Posted on: March 29th, 2019

Interphex 2019    |   Visit Booth 2833   |   April 2-4, 2019   |   Javits Center, NYC

Scott Process Engineers and WMFTG experts will be on hand to demonstrate the industry leading Quantum peristaltic pump with patented ReNu single-use (SU) cartridge technology.

See first-hand Flexicon’s FPC60; Flexible, Configurable Fill/Finish System.

INTERPHEX 2019 – WMFTG Booth #2833

Posted on: March 27th, 2019

Interphex 2019    |   Visit Booth 2833   |   April 2-4, 2019   |   Javits Center, NYC

Choose Scott Process and Watson-Marlow

for all your Bio-Pharm & Pharmaceutical Needs


Quantum redefines peristaltic pump performance for single-use downstream bioprocessing.

Scott Process Engineers and WMFTG experts will be on hand to demonstrate the industry leading Quantum peristaltic pump with patented ReNu single-use (SU) cartridge technology.


Easy Streamlined Batch Production with Flexicon’s New FPC60

Uniquely flexible, configurable fill/finish system.

  • Highly accurate peristaltic filling
  • Fast and flexible change over between batches and vial sizes
  • Zero product waste in batch start up
  • Designed for ready-to-use vials and single-use fluid paths

 

See first-hand, the Flexible, Configurable Fill/Finish System at Interphex

Posted on: March 27th, 2019

 

See how we can help take production to a

new level with the Flexicon FPC60.

Uniquely flexible, configurable fill/finish system

Interphex 2019    |   Visit Booth 2833   |   April 2-4, 2019   |   Javits Center, NYC

Biotechnology and pharmaceutical fluid-in-motion expert Watson-Marlow Fluid Technology Group (WMFTG), will be showcasing its unparalleled bioprocessing products including the New Flexicon FPC60, highly accurate peristaltic fill/finish system offers customers exceptional production flexibility. A wide variety of modules are available for the system, allowing users to create their own unique filling solution to suit small-batch applications. The modules include vial infeed, filling, stoppering, capping, auto-reject, gas purging and product outfeed. As a result, the FPC60 is ideal for bioprocessing applications.

(more…)

Watson Marlow Quantum Peristaltic Pump at Interphex

Posted on: March 27th, 2019

Quantum redefines peristaltic pump performance for single-use downstream bioprocessing

  • Higher downstream process yields – throughout the pressure range
  • Accurate flow linearity independent of back-pressure
  • Simple to replace cartridge technology reduces time and cost for validation

Interphex 2019    |   Visit Booth 2833   |   April 2-4, 2019   |   Javits Center, NYC

Scott Process Engineers and WMFTG experts will be on hand in Booth #2833 to demonstrate the industry leading Quantum peristaltic pump with patented ReNu single-use (SU) cartridge technology.

(more…)

arrow_upward